Acoustics quiz

From SteelConstruction.info
Revision as of 12:11, 12 March 2019 by Chris.dolling@steelconstruction.org (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Please answer the following 10 multiple choice questions, then click 'submit' to check the result. The pass mark for a CPD certificate is 8 out of 10, and you may retake the quiz as many times as you wish, but the questions will vary! Please note that one, two, three or all of the possible answers presented for each question may be right, and to gain a mark for that question all correct answers must be identified.

Good luck

Acoustics

To the human ear a 10 dB increase in sound 'feels' like an increase in loudness of how many times?

1
2
3
4

Which of these statements is correct?

It is generally easier to provide sound insulation for high frequency sound
It is generally easier to provide sound insulation for low frequency sound
Sound insulation materials have the same effect on high frequency and low frequency sound
Sound insulation is only required for low frequency sound

Which of the following statements are true for acoustic design of hospitals?

Sound insulation between rooms is not an important design consideration
Hospitals must be constructed using Robust Details
Hospitals must undergo on-site acoustic tests
The main reference for acoustic design of hospitals is HTM 08-01

Loudness of sound is measured in what units?

Hertz (Hz)
Joules (J)
Decibels (dB)
Watts (W)

The online acoustic performance prediction tool is ...?

Based on an empirical approach derived from acoustic test results
Intended for estimating purposes only
Intended to provide precise predictions
Only part of the solution, exact specification of materials and quality of workmanship are also important

For demonstrating compliance with the acoustic regulations which of these statements is correct?

Robust Details must be used for construction of new dwellings
Dwellings must either be constructed using Robust Details or on-site acoustic testing must be carried out
A qualified acoustic engineer must assess the details used for constructing dwellings
All dwellings must undergo on-site acoustic testing

Which of the following statements are true for acoustic design of schools?

The main reference for acoustic design of schools is Building Bulletin 93
External wall sound insulation is important for schools so that occupants of neighbouring buildings are not disturbed by noise of children
Reverberation and transmission of speech characteristics are important for schools
Sound insulation in schools is not mentioned in Building Regulations

For walls within the same dwelling (internal walls) which of these statements is true?

Internal walls must be at least 150 mm thick
Two layers of plasterboard must be used on both sides of an internal wall
For internal walls it is not necessary to demonstrate compliance with regulations by PCT or using Robust Details
Specially designed 'acoustic' studs must be used for internal wall construction

Impact sound insulation is generally important for what?

Floors only
Walls only
Floors and walls
Neither walls nor floors

Acoustic insulation testing is generally carried out at ...?

One single frequency
A range of frequencies from 100 Hz to 3150 Hz
Two specific frequencies of 100 Hz and 3150 Hz
A range of frequencies from 300 Hz to 1000 Hz